October 6, 2020

67 (C10 Trucks) Project

1967 C10 Small Window Original Short Bed Chevrolet Truck

.

ENGINE SETUP

LS 6.0 LQ9 68k Miles Turn key ready engine from SALINASLSX.COM

Transmission is a 4L80e, SalinasLSX.com engines are Turnkey ready (Plug And Play).

.

For Engine Installation we used

C-10 LS SWAP MOUNTS Dirty Dingo"Dingo Sliders" PAIR (Raw steel)

Dingo Sliders position the LS engine 1/4 inch higher than other adapter plates. You can use your factory, aftermarket urethane, or solid engine mounts. Dingo Sliders will allow you to mount the engine in the original bell housing position or move the engine forward up to 2 inches and lock the engine down anywhere between.

Transmission Crossmember

Dirty Dingo adjustable transmission crossmember

Dirty Dingo adjustable transmission crossmember bolts into 2WD 1963-1987 C10 C20 Truck's, Blazer's, and Suburban's. This crossmember, in most cases, will bolt to the frame using existing transmission mounting holes. This adjustable crossmember will allow you to run a powerglide, TH350, TH400, 700R4, 4L60, 4L65, 4L70, 4L75, 4L80, 6L80, and 6L90 and adjust the crossmember without drilling any new holes into your frame. This is designed for lifted or lowered trucks and will retain the factory transmission angle for proper driveshaft alignment. CNC bent 1 3/4" diameter tubing with 1/4" plates that will clear long tube headers and exhaust up to 4" in diameter. Crossmember is above frame rails and will clear when laying the frame on the pavement. Includes grade-8 bolts, washers, and Teflon locking nuts for installation. Welded and cooled in a custom fixture for precision fit.

Gas Tank Relocate Rear Mount Gas Tank

Relocating the gas tank to the rear of the truck moves the fuel's weight to a more optimal location, frees up interior room and eliminates gas fumes inside the cab.

For Our 67 C10 Project we decided to go with Boyd Welding 63-72 C10 Bed Fill EFI Tank With Aeromotive Stealth 340 In-Tank pump

Tank Dimensions: 26.5 x 19 x 10Tank Material: .125 Aluminum
- CNC Machined Non Vented / Threaded Cap.
1/2" NPT Vent
3/8" NPT Return
Sending unit flange
3/8" NPT Drain Port
#6 ORB Female Pump Outlet
3 Baffles
In-Tank Aeromotive Stealth 340 Pump
Approx 19 Gallons

C10 Bench Cover

For our Bench Seat Cover we decided to go with b62upholstery.com they are the best in the Business! the (Real McCoy) Bench seat cover is what we decided to go with. The Real McCoy design brings the added touch of diamond stitching to this classic layout. Prefect for installing yourself or taking it to your local upholstery shop and having installed by them.